Digital photography, as opposed to film photography, uses electronic devices to record and capture the image as binary data. This facilitates storage and editing of the images on personal computers, and also the ability to show and delete unsuccessful images immediately on the camera or software itself.
Digital cameras now outsell film cameras and include features that are not found in film cameras such as the ability to shoot video and record audio. Some other devices, such as mobile phones, now include digital photography features.
Digital cameras now outsell film cameras and include features that are not found in film cameras such as the ability to shoot video and record audio. Some other devices, such as mobile phones, now include digital photography features.
Sensors and storage:
Sensors read the input of light data, such as luminosity and chromatic information, and digital memory devices store the digital image information. There are two main types of sensors:
charge-coupled device (CCD) - charge is shifted to a central charge-to-voltage converter
CMOS sensors
Nearly all digital cameras now use solid state flash memory, but for a time floppy disks were used in early digital cameras such as the Sony Mavica.
charge-coupled device (CCD) - charge is shifted to a central charge-to-voltage converter
CMOS sensors
Nearly all digital cameras now use solid state flash memory, but for a time floppy disks were used in early digital cameras such as the Sony Mavica.
Performance metrics:
The quality of a digital image is the sum of various factors, many of which are similar to film cameras. Pixel count (typically listed in megapixels, millions of pixels) is only one of the major factors, though it is the most heavily marketed. Pixel count metrics were created by the marketing organizations of digital camera manufacturers because consumers can use it to easily compare camera capabilities. It is not, however, the major factor in evaluating a digital camera. The processing system inside the camera that turns the raw data into a color-balanced and pleasing photograph is the most critical, which is why some 4+ megapixel cameras perform better than higher-end cameras.
Lens quality: resolution, distortion, dispersion (see Lens (optics))
Capture medium: CMOS, CCD, Negative film, Reversal Film etc.
Capture format: pixel count, digital file type (RAW, TIFF, JPEG), film format (135 film, 120 film, 5x4, 10x8).
Processing: digital and / or chemical processing of 'negative' and 'print'.
Lens quality: resolution, distortion, dispersion (see Lens (optics))
Capture medium: CMOS, CCD, Negative film, Reversal Film etc.
Capture format: pixel count, digital file type (RAW, TIFF, JPEG), film format (135 film, 120 film, 5x4, 10x8).
Processing: digital and / or chemical processing of 'negative' and 'print'.
Pixel counts:
The number of pixels n for a given maximum resolution (w horizontal pixels by h vertical pixels) can be found using the formula: n = wh. This yields e. g. 1.92 megapixels (= 1,920,000 pixels) for an image of 1600 x 1200. The majority of compact (not SLR) digital cameras have a 4:3 aspect ratio, i.e. w/h = 4/3.[citation needed]
The megapixel or pixel count quoted by some manufacturers can be misleading because it may not be truly representative of the number of full colour pixels. For cameras using a Bayer sensor it is the number of single coloured photosites (light sensitive areas) on the sensor. For the Foveon X3 sensor the number currently (Feb 2004 - Sigma SD-10) presented by Sigma is the number of photosites times three (multiplied because each photosite records three colours), however the images that result will have a number of pixels equivalent to the number of photosites - not the tripled number quoted. It is not possible to directly compare the megapixel ratings of these two sensors but in many people's opinions a 6 MP Bayer filter sensor is roughly equivalent to a 10.2 MP Foveon X3 (3.4 MP*3). Some hold the opinion that the Foveon is worse than this and the ratio is more like one Bayer to two Foveon. It is largely a matter of personal opinion so prints from the two sensors should be inspected by interested parties.
The megapixel or pixel count quoted by some manufacturers can be misleading because it may not be truly representative of the number of full colour pixels. For cameras using a Bayer sensor it is the number of single coloured photosites (light sensitive areas) on the sensor. For the Foveon X3 sensor the number currently (Feb 2004 - Sigma SD-10) presented by Sigma is the number of photosites times three (multiplied because each photosite records three colours), however the images that result will have a number of pixels equivalent to the number of photosites - not the tripled number quoted. It is not possible to directly compare the megapixel ratings of these two sensors but in many people's opinions a 6 MP Bayer filter sensor is roughly equivalent to a 10.2 MP Foveon X3 (3.4 MP*3). Some hold the opinion that the Foveon is worse than this and the ratio is more like one Bayer to two Foveon. It is largely a matter of personal opinion so prints from the two sensors should be inspected by interested parties.
Equivalent features:
Image noise / grain: Noise in a digital camera's image is remarkably similar to Film grain in a film camera. At high ISO levels (film speed) the grain/noise becomes more apparent in the final image. Although film ISO levels can be lower than digital ISO levels (25 and 50 respectively), digital settings can be changed quickly according to requirements, while film must be physically replaced and protected from all light during such replacement. Additionally, image noise reduction techniques can be used to remove noise from digital images and film grain is fixed. From an artistic point of view, film grain and image noise may be desirable when creating a specific mood for an image. Modern digital cameras have comparable noise/grain at the same ISO as film cameras. Some digital cameras though, do exhibit a pattern in the digital noise which is not found on film.
Speed of use: Current digital and film cameras can be switched on and take images instantly. Saving images to disk takes no longer than winding on the film (see Frames per second).
Frames per second: The Canon EOS-1D Mark III can achieve 10 frames per second which makes it the fastest digital SLR in the world; the fastest film SLR could shoot 10 frames per second. The Nikon F5 is limited to 36 continuous frames (the length of the film) while the Canon EOS-1D Mark III is able to take ~110 high definition jpeg images before its buffer must be cleared and the remaining space on the storage media can be used.
Image longevity: Although digital image data does not degrade (film stock can fade), the media on which the digital images are stored can decay or become corrupt, leading to a loss of image integrity. Both formats should be stored under archival conditions for maximum longevity. Perfect copies of digital images can be made on fresh media, and digital images can be stored on duplicate media. This greatly reduces the risk of losing digital images, and if done correctly, digital backups are safer than film. In comparison, copying negatives or transparencies incurs additional noise and loss of detail. Negatives can however be easily converted to digital if longevity is a requirement.
Colour reproduction: Colour reproduction (gamut) is dependent on the type of film / sensor used and the quality of the capture media, lens group and processing. Different films and sensors are sensitive to differing subsets of colour thus the photographer needs to have an understanding of the light conditions and the media used to ensure accurate colour reproduction. Many digital cameras offer RAW format (sensor data) which makes it possible to choose color space in the development stage regardless of camera settings.
Image noise / grain: Noise in a digital camera's image is remarkably similar to Film grain in a film camera. At high ISO levels (film speed) the grain/noise becomes more apparent in the final image. Although film ISO levels can be lower than digital ISO levels (25 and 50 respectively), digital settings can be changed quickly according to requirements, while film must be physically replaced and protected from all light during such replacement. Additionally, image noise reduction techniques can be used to remove noise from digital images and film grain is fixed. From an artistic point of view, film grain and image noise may be desirable when creating a specific mood for an image. Modern digital cameras have comparable noise/grain at the same ISO as film cameras. Some digital cameras though, do exhibit a pattern in the digital noise which is not found on film.
Speed of use: Current digital and film cameras can be switched on and take images instantly. Saving images to disk takes no longer than winding on the film (see Frames per second).
Frames per second: The Canon EOS-1D Mark III can achieve 10 frames per second which makes it the fastest digital SLR in the world; the fastest film SLR could shoot 10 frames per second. The Nikon F5 is limited to 36 continuous frames (the length of the film) while the Canon EOS-1D Mark III is able to take ~110 high definition jpeg images before its buffer must be cleared and the remaining space on the storage media can be used.
Image longevity: Although digital image data does not degrade (film stock can fade), the media on which the digital images are stored can decay or become corrupt, leading to a loss of image integrity. Both formats should be stored under archival conditions for maximum longevity. Perfect copies of digital images can be made on fresh media, and digital images can be stored on duplicate media. This greatly reduces the risk of losing digital images, and if done correctly, digital backups are safer than film. In comparison, copying negatives or transparencies incurs additional noise and loss of detail. Negatives can however be easily converted to digital if longevity is a requirement.
Colour reproduction: Colour reproduction (gamut) is dependent on the type of film / sensor used and the quality of the capture media, lens group and processing. Different films and sensors are sensitive to differing subsets of colour thus the photographer needs to have an understanding of the light conditions and the media used to ensure accurate colour reproduction. Many digital cameras offer RAW format (sensor data) which makes it possible to choose color space in the development stage regardless of camera settings.
more info will be later.. ;)
No comments:
Post a Comment